Victron Centaur 24/60 Charger
Centaur 24/30 battery chargers are simple, rugged and economical, but they do not compromise our high quality standards and deliver the best results that today's technology allows.
Epoxy-coated aluminum enclosures and stainless steel fasteners withstand the harshest environments: heat, humidity and salt spray.
Victron Centaur 60A 24V Charger
Specifications:
- Electronic circuits are protected from oxidation by acrylic paint. Temperature sensors ensure that all components operate within specified limits, automatically reducing output power if necessary in extreme environmental conditions.
Universal Input from 90 to 265 Volts:
- Centaur chargers accept a very wide range of supply voltages, from 90 to 265 volts and from 45 to 65 Hz, without any adjustment. This makes them compatible with all common voltages and frequencies and allows them to operate on unstable power grids.
3 full power outputs:
- Three isolated outputs allow 3 sets of batteries to be charged simultaneously. Each output can deliver the rated charge power.
3-stage charging with temperature compensation:
- The Centaur charges at full power until the output current reaches 70% of the rated power, then maintains a constant absorption voltage for 4 hours. The charger then switches to float mode. An internal temperature sensor compensates the charge voltage by - 2 mV per °C per element.
Charge Voltage Selector:
- An internal switch allows easy selection of voltages adapted to the main battery types (lead-acid, gel, AGM).
Charging Current Indicator:
- An ammeter on the front panel allows you to know the charger's performance against the batteries at all times.
41003
Data sheet
- Type of Installation
- Off-Grid
- Model
- Centaur 24/60
- Voltage
- Input: 90-265 Vac
Output: 24 Vdc - Sizes
- 505x255x130 mm
- Weight
- 26 kg
- Charger
- 60A
- Degree of Protection
- IP20