Shurflo 2088-313-145 12v solar pump
Shurflo automatic diaphragm pumps are used to transfer and increase pressure up to a maximum value of 7 bar and 23.5 L/min depending on the model.
They are all self-priming and can work for a long time. The automation of these models is achieved by means of an adjustable pressure switch incorporated in the pump body that commands the pump start/stop or by means of an internal bypass to prevent hydraulic overloads.
Shurflo pumps are used in a wide variety of applications where size, chemical resistance or ease of maintenance and service are important requirements due to their high technology, reliability, durability and the wide variety of materials available.
Examples of applications
- Mobile fluid handling equipment
- Road rollers
- Road sweepers
- Agricultural vehicles, etc.
They are usually installed with a 5 or 20 liters accumulator, which allows a small water reserve to avoid continuous starts, in applications such as pressure groups for houses the installation of the accumulator is necessary.
33003
Data sheet
- Voltage
- 12V
- Color
- Black
- Sizes
- 60.9x45.7x27.9 cm
- Weight
- 13.8 kg
- Flow rate
- 13.6 L/m
- Pump Type
- Surface
Shurflo automatic diaphragm pumps are used to transfer and increase pressure up to a maximum value of 7 bar and 23.5 L/min depending on the model.
They are all self-priming and can work for a long time. The automation of these models is achieved by means of an adjustable pressure switch incorporated in the pump body that commands the pump start/stop or by means of an internal bypass to prevent hydraulic overloads.
