Pressure Group Shurflo 2088 with 20L boiler 230V
Pressure group with 20 liter boiler with Shurflo pump 2088-592-144 at 230V. Supplied fully assembled with hoses. This kit must be used in all renewable energy installations.
Working with boiler prevents the pump from switching on every time the user opens the tap, the pump pressure switch does not suffer when the flow rate coming out of the tap is lower than that driven by the pump, the pressure is homogeneous at all times.
Features:
- The default pressure group is at 1.9 Bar.
- Ideal for 230V solar and clean water applications.
- Designed for heavy duty sprinkler irrigation applications.
- Quiet operation.
- Self priming at 3.6 meters.
Specifications:
- Duty Cycle: Intermittent (recommended no more than 30 minutes of continuous use).
- 3-chamber diagram.
- Motor: Permanent magnet.
- Pressure switch: Pressure switch off adjustable in range of 2.07 to 3.45 Kg/cm2.
- Suction: Self suction above 3 meters (10 feet) vertical, maximum.
- Inlet pressure 2.07 Kg/cm2 (2.1 Bar 30 PSI).
- Inlet and outlet with 1/2 inch male thread.
- Voltage: 230 VAC.
- Flow rate: 9.5 L/Min.
- Power consumption: 3 Amps.
- Kit weight: 4,8 Kg.
34003
Data sheet
- Model
- PWB-20LH
- Voltage
- 230V
- Pump Type
- Surface
Pressure group with 20 liter boiler with Shurflo pump 2088-592-144 at 230V. Supplied fully assembled with hoses. This kit must be used in all renewable energy installations.
